Fluid Mechanics MCQ

Q1. What is the SI unit of dynamic viscosity?

Correct Answer: A

Dynamic viscosity is a measure of the ability of a fluid to resist flow or deformation when an applied shear force acts in parallel to its layers. This describes the level of internal friction between layers of a fluid in relative motion. Dynamic viscosity has the SI unit Pascal-second (PaΒ·s). 1 Pascal-second = 1 NΒ·s/mΒ² To give a simple example, liquids such as honey have higher dynamic viscosity than water and hence will be more resistant to flow. So the right answer among these options is Pascal-second. Dynamic viscosity is an essential property that appears in fluid mechanics, engineering calculations and analysis of the movement of fluids.

Q2. The Reynolds number helps predict:

Correct Answer: A

Reynolds number indicates flow type.

Q3. In fluid flow, Bernoulli’s equation represents the conservation of:

Correct Answer: A

Bernoulli’s principle is about energy conservation.

Q4. What is the critical Reynolds number for flow in a pipe?

Correct Answer: C

2300 is the approximate critical Reynolds number.

Q5. The flow where fluid layers slide past one another smoothly is called:

Correct Answer: A

Laminar flow is smooth and orderly.

Q6. The ratio of inertial force to viscous force is:

Correct Answer: B

Reynolds number is inertial over viscous forces.

Q7. What does the continuity equation express?

Correct Answer: A

Continuity equation is mass conservation.

Q8. The no-slip boundary condition implies:

Correct Answer: A

Fluid velocity at the wall is zero.

Q9. Pascal’s law relates to:

Correct Answer: A

Pressure applied is transmitted equally in all directions.

Q10. Which instrument measures pressure in fluids?

Correct Answer: A

Manometer is used to measure fluid pressure.

Q11. Hydrostatic pressure at depth h in a fluid is:

Correct Answer: A

Hydrostatic pressure depends on density, gravity, depth.

Q12. Drag force experienced by an object moving through fluid depends on:

Correct Answer: A

Drag approximately varies with square of velocity.

Q13. Flow in which velocity at a point does not change with time is:

Correct Answer: A

Steady flow has constant velocity at a point over time.

Q14. Hydraulic diameter is used to characterize flow in:

Correct Answer: A

Hydraulic diameter accounts for non-circular cross sections.

Q15. Kinematic viscosity is:

Correct Answer: A

Kinematic viscosity = μ / ρ.

Q16. The boundary layer is the region where:

Correct Answer: A

Velocity gradient exists in boundary layer.

Q17. What is the significance of Mach number?

Correct Answer: A

Mach number indicates compressibility effects.

Q18. Froude number is relevant in:

Correct Answer: A

Froude number quantifies gravity effect in open channels.

Q19. In turbulent flow, velocity fluctuations occur:

Correct Answer: A

Turbulent flow has chaotic velocity fluctuations.

Q20. Poiseuille’s law describes:

Correct Answer: A

Poiseuille’s law is for viscous laminar pipe flow.

Q21. Manometer fluid should have:

Correct Answer: A

Higher density increases sensitivity.

Q22. Surface tension arises due to:

Correct Answer: A

Surface tension results from molecular cohesive forces.

Q23. Which theory explains the velocity profile in laminar flow?

Correct Answer: B

Navier-Stokes equations model velocity profiles.

Q24. A Venturi meter measures:

Correct Answer: A

Flow rate is calculated from pressure drop.

Q25. Hydraulic jump occurs when:

Correct Answer: A

Hydraulic jump is transition from high to low velocity.

Q26. Which dimensionless number relates inertial to gravitational forces?

Correct Answer: B

Froude number compares inertial & gravity forces.

Q27. The velocity of fluid molecules near a stationary wall is:

Correct Answer: B

No slip condition states velocity at wall is zero.

Q28. Incompressible flow assumes:

Correct Answer: A

Incompressible flows have constant density.

Q29. Which parameter affects the lift generation on a wing?

Correct Answer: A

Lift depends strongly on velocity.

Q30. The transition from laminar to turbulent flow is influenced by:

Correct Answer: A

Flow conditions determine transition point.

Q31. A pitot tube measures:

Correct Answer: C

Pitot tube provides total pressure in flow.

Q32. Porosity of a medium is:

Correct Answer: A

Porosity quantifies void fraction.

Q33. Newtonian fluids have:

Correct Answer: A

Newtonian fluids maintain constant viscosity.

Q34. Turbulent kinetic energy is dissipated mainly by:

Correct Answer: A

Viscosity converts turbulent energy to heat.

Q35. The Prandtl number is the ratio of:

Correct Answer: A

Prandtl number relates viscosity and thermal conductivity.

Q36. Boundary layer thickness decreases with:

Correct Answer: A

Higher velocity thins the boundary layer.

Q37. Sink flow refers to:

Correct Answer: A

Sink flow has flow converging inward.

Q38. Flow separation occurs due to:

Correct Answer: A

Adverse pressure gradients cause separation.

Q39. In flow through pipes, Darcy-Weisbach equation is used to calculate:

Correct Answer: A

It quantifies frictional pressure drop.

Q40. Which equipment measures velocity profiles in fluid flows?

Correct Answer: A

LDAs measure velocity in flow fields.

Latest Blogs